Krix Tropix

○ Weather resistance withstands Australian conditions
○ Great sound with effortless bass
○ Impressive outdoor entertaining

The all-weather Tropix will elevate your next outdoor party with seriously big sound. Smooth response and deep extension mean high quality music can be enjoyed by everyone.

Description

For bigger, deeper bass for your next outdoor party, you need to experience the Krix Tropix.

With a big enclosure, big bass driver, and big tweeter, the Tropix produces a seriously big sound, with high sensitivity and extended low frequencies. Treat your guests to outdoor entertaining backed by a 165mm bass driver and 26mm damped mylar dome tweeter, complete with a special acoustic treatment beneath the dome to improve high frequency performance.

The Tropix also features a marine grade, all-weather, UV stabilised enclosure, internal ribs that reinforce and minimise panel resonance while also maximising bass performance, marine grade stainless hardware, and an aluminium grille and mounting bracket to protect against corrosion. Complete with a five-year warranty, you can experience great sound outdoors all year round.

For the ultimate sound experience at home, play it through Krix.

The Krix Tropix has a frequency range of 55Hz – 20kHz on wall response and a power handling of 20-140 Watts RMS recommended amplifier power. Sensitivity level is 87dB for 2.83 volts at 1 metre. The speakers uses binding posts with a 2-way configuration. The speakers are sealed with an impedance of nominally 8 Ohms (minimum 5.8 Ohms).

View all Krix products here.

Follow us on Facebook

Specifications

Frequency Range
55Hz-20kHz on wall response

Power Handling
20 – 140 Watts RMS recommended amplifier power

Sensitivity
87dB for 2.83 volts at 1 metre

Impedance
Nominally 8 Ohms (minimum 5.8 Ohms)

Configuration
2-way

Enclosure Type
Sealed

Dimensions
220mm high x 305mm wide x 225mm deep

 

Low Frequency Driver
Nominal 165mm (6½”) polypropylene cone with rubber surround. 25mm (1”) high temperature voice coil wound on a radial vented kapton former and copper shorting ring for lower distortion

High Frequency Driver
26mm (1”) specially damped mylar dome with phase plug. Ferro fluid cooled

Input Terminals
Binding posts

Weight
3.5kg each
 

Brochure

Specifications
Installation Manual