Krix Aquatix

○ Great outdoor performance
○ Weather resistant
○ Entertain outdoors in style

Entertain friends and enhance your outdoor experience with these high performance, weather resistant speakers.

Description

Good music makes the great outdoors even greater, and with the Krix Aquatix you can enjoy your favourite albums in high definition outside.

Superbly designed and built tough enough to stand up to all kinds of weather conditions, the Aquatix allows you to enjoy concert quality background music in your backyard, thanks to a hefty 130mm bass driver matched with a 22mm damped mylar dome tweeter. A special treatment beneath the tweeter’s dome improves high frequency performance.

Ready for all kinds of weather, the UV stabilised polymer enclosure ensures the Aquatix remains sun resistant, while internal ribs reinforce and minimise panel resonance. Marine grade stainless steel hardware, with an aluminium grille and mounting bracket protect against corrosion, while a five-year warranty protects your investment in great outdoor sound.

For the ultimate sound experience at home, play it through Krix.

The Krix Aquatix has a frequency range of 70Hz – 20kHz on wall response with a power handling of 20-100 Watts RMS recommended amplifier power. The speakers have binding posts with a 2-way configuration. Sensitivity levels is 87dB for 2.83 volts at 1 metre. The low frequency driver speaker uses a nominal 130mm (5″) polypropylene cone with rubber surround. 25mm (1″) high temperature voice coil wound on a radial vented kapton former. For high frequency drivers they use 22mm (1″) specially damped mylar dome with phase plug.

View all Krix products here.

Follow us on Facebook

Specifications

Frequency Range
70Hz-20kHz on wall response

Power Handling
20 – 100 Watts RMS recommended amplifier power

Sensitivity
87dB for 2.83 volts at 1 metre

Impedance
Nominally 8 Ohms (minimum 6.7 Ohms)

Configuration
2-way

Enclosure Type
Sealed

Dimensions
185mm high x 250mm wide x 190mm deep

 

Low Frequency Driver
Nominal 130mm (5”) polypropylene cone with rubber surround. 25mm (1”) high temperature voice coil wound on a radial vented kapton former

High Frequency Driver
22mm (1”) specially damped mylar dome with phase plug. Ferro fluid cooled

Input Terminals
Binding posts

Weight
2.5kg each

 

Brochure

Specifications
Installation Manual