Krix Vortex Mk2

○ Dedicated midrange for vocal detail and clarity
○ Remarkable, tight bass
○ Vertically aligned tweeter and midrange ensures sound is heard throughout the room

Discover the benefits of a 3 way design. Paired with the Harmonix Mk2, this centre channel speaker presents the ultimate in realism.

Description

With a design based on the highly successful Harmonix Mk2, the Krix Vortex Mk2 delivers vocal clarity, mid-range depth and a dynamic bass response. The vertical arrangement of the tweeter and midrange drivers eliminates phasing problems if seated off-axis, ensuring even sound distribution so that every seat in the room is a good one.

The drivers are identical to the Krix floorstanding Harmonix Mk2 main speakers, providing perfect timbral matching, delivering a full soundstage that is seamless in its transition from left to right.

Big, dual 165mm bass drivers come with heavy-duty voice coils, wound on high-powered aluminium formers, while the 130mm midrange driver has an oversized magnet for lower distortion. The 26mm high frequency driver, with its wave-guide plug, also ensures controlled directivity.

The sonic strength of the Krix Vortex Mk2 will provide your system with the ultimate in realism, ensuring your home theatre comes alive!

For the ultimate sound experience at home, play it through Krix.

The speakers have a frequency range of 35Hz – 40kHz in room response and a power handling of 50-250 Watts RMS recommended amplifier power. The sensitivity range is 91dB for 2.83 volts at 1 metre and an impedence of nominally 6 Ohms (minimum 3 Ohms).

View all Krix products here.

Follow us on Facebook

Specifications

Frequency Range
35Hz-40kHz in room responsePower Handling
50 – 250 Watts RMS recommended amplifier power

Sensitivity
91dB for 2.83 volts at 1 metre

Impedance
Nominally 6 Ohms (minimum 3 Ohms)

Configuration
3-way

Enclosure Type
Dual chambers – sealed midrange chamber with bass reflex main chamber. Front vented with internal and external flaring

Dimensions
230mm high x 725mm wide x 370mm deep

 

Low Frequency Drivers
2 x nominal 165mm (6½”) laminated polypropylene cones. 33mm (1¼”) voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilization ring for low distortionMid Frequency Driver
1 x nominal 130mm (5″) coated paper cone. 26mm (1″) voice coil wound on high powered aluminium former, using copper shorting ring and oversized magnet for lower distortion

High Frequency Driver
25mm (1″) dual concentric diaphragm with wave-guide centre plug for controlled directivity. Non-reflective dual chambered magnet structure with copper shorting ring to lower distortion

Input Terminals
Dual gold plated bi-wire binding posts (bi-wireable, bi-ampable)

Weight
24kg each

 

Brochure

Specifications